Important - Medistrom Co-Pilot 12 Guide De Démarrage Rapide

Standalone Battery (Travel Battery)
IMPORTANT: Use of heated humidification and/or heated
tubing will significantly decrease the run-time of the Pilot Plus
and Co-Pilot batteries. To maximize you run-time, please either
disconnect your PAP device's humidifier or ensure that the heat
setting is set to zero.
1. Secure the Co-Pilot and Pilot batteries together using the two
rubber joiners included with the Co-Pilot. Please ensure that
the Pilot battery (not included with Co-Pilot package) is in the
lower slot and the Co-Pilot is in the upper slot and that the
front of each battery is facing the same direction when joined
together.
2. Connect the
the Pilot Plus CPAP battery using the DC Cable that is included
in the Co-Pilot package.
port on the Co-Pilot to the
OUTPUT
jack on
CHARGE
4