Introduction & Features; Safety Instructions - Perel Tools EPATH1 Notice D'emploi

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EPATH1! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• Never touch the device with wet hands or when the heater is in operation. Let it cool down for ± 15 minutes
before changing the tilt angle to avoid burns.
• Do not place objects directly in front of the device. Do not cover the heater with e.g. towels.
• Do not open the heater. Have a qualified technician repair the device if necessary.
• Keep the device away from water. Do not use it in a bathroom or near pools. Do not place this device close to
curtains and other combustible material.
• This device is not designed for professional use. The heater can be used indoors and outdoors. When using the
heater outdoors, make sure to install it under a shelter and to connect it to an indoor power socket of max.
230VAC / 50Hz.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorized dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Do not connect the device to a dimmer but directly to a mains socket. Make sure the mains socket remains
accessible.
• There may be a particular smell when the device is activated for the first time. This is normal and any smell will
gradually disappear.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorized users.
3. Installation
• Before installing the heater, make sure the mains socket is fitted with a 30mA circuit breaker.
• Choose an installation spot taking in consideration the safety instructions above. Mount the bracket onto the wall
using the 4 screws. Fix your EPATH1 to the bracket.
EPATH1
EPATH1 – PATIO HEATER
3 PEREL