Newteck Rhapsody dual 365 Mode D'emploi page 46

The remote does not work
* If the above method cannot resolve the malfunction, contact the
retailer's customer service. Do not disassemble, repair or install yourself.
Cold mode
Oscillation
Increase air
Reduce air
Note: The main device will beep when the remote control is used.
ON/OFF
By pressing this button you can turn the device on or off.
SLEEP MODE (this button only works with cold air)
When you press the "Sleep mode" button on the remote control,
the screen will show "LL" and the air speed will be reduced to
a minimum.
Press again to exit sleep mode.
(You can also exit the current mode by pressing the "+" increase
air button).
46
Is the remote control lined up with the
signal receiver?
Heat mode
Turbo mode
Timer
Sleep mode
Increase temperature
Activate and deactivate
Reduce temperature