Using The Remote Control - Newteck Rhapsody dual 365 Mode D'emploi

notify you twice and then stop working after you release your hand.
change air intensity
When the host is running: click the main power button to modify the
force with which the device expels air from 1 to 9.
Oscillating Mode
Press and hold the power button for 1 second, the tone will sound once
and the fan will start to oscillate.
Press and hold the power button for 1 second again, the tone will sound
once and the fan will stop oscillating.
If you press and hold the power button for 3 seconds, the display will
indicate "00" in blue and the device will turn off.

- USING THE REMOTE cONTROL -

Please, insert the battery correctly
Malfunction
The device is plugged in
but the fan does not work
The remote does not work
BATTERY INSTALLATION
Battery
METHOD AND
cover
TROUBLESHOOTING
Battery installation method
1. Open the remote control's battery
cover.
2. Insert two new AAA batteries
correctly (Nº. 7. Check that they are
completely free of moisture.
3. Close the remote control's battery
cover.
Troubleshooting
Analysis of the cause
Is the plug correctly inserted?
Are the batteries depleted?
Are the batteries inserted correctly?
45