Seecode 20255 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

control switch again a little longer.
Notes:
By pressing the control switch again during sterilisation, you can switch
between the two modes, automatic and one-time sterilisation mode. This
means, for example, that if you are in one-time sterilisation mode and
press the control switch, you immediately switch to automatic sterilisation
mode. If you press the control switch again, you switch to the one-time
sterilisation mode accordingly.
When the lamp on the unit is lit or flashing, the steriliser operates steadily,
even if no continuous blower sound is heard.
3.Battery charge indicator
The indicator light on the control switch flashes quickly when the battery of
the ozone steriliser needs to be charged.
The indicator light flashes slowly while the battery is being charged.
The indicator light is on constantly when the battery is fully charged.
NOTES
Warnings:
1.
Please avoid being in the relevant room while the ozone steriliser
is working.
2.
The ozone decomposes itself to oxygen. After disinfection and
sterilisation no ozone remains.
3.
To avoid the risk of electronic shock, please make sure that your
hands are dry when you turn the ozone sterilizer on and off.
4.
To prevent damage, avoid contact of the steriliser with splashing
water.
5.
The product has a built-in high-pressure ozone module. Do not
disassemble or repair it yourself. Please contact customer service
for this.
6.
The product has a built-in rechargeable lithium battery. Please
unplug the product from the mains after it has been fully charged.
7.
To avoid any damage to the user, please strictly follow the above
instructions for operating this product.
8.
We are not responsible for incorrect operation
8

Publicité

Table des Matières
loading

Table des Matières