Snow 821 Guide De Démarrage Rapide page 7

Initializing and registering the phone
Please note: You will need the registration information received from your
Internet service provider or your network administrator - normally the phone or
extension number, the password, and the registrar.
After you have set up the phone and connected it to the network as shown on pages
2 - 5, the phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network does not
support DHCP, you must obtain the IP address, netmask, IP gateway, and DNS server
from your Internet service provider or your network administrator and enter them manually
when you are asked to do so on the display.
Watch the display and, when asked to, make selections with  and save with .
1. L anguage. The default is English.
2. Time zone
3. Dial tone
4. "Welcome" screen: Press any key.
5. Enter the account number. Save with .
6. Enter the registrar. Press .
7. E nter the password received from your Internet service provider or administrator.
Press . If the registration was successful you will see:
Infobar with date & time
Active identity:
Green symbol
Entering numerals, letters, and special characters
Press any key or pick up handset.
Current input mode:
Next input mode:
Changing input mode:
Move cursor to the left
t:
Move cursor to the right
u:
Entering special characters and symbols in letter input mode: Press "1" key one or
more times quickly, with a pause after each character.
Examples: 1x = "." ; 2x = "+"; 3x = "@"; 4x = "1"; 5x = ":"; 6x = ","
Identity line
Delete character to
the left of the cursor
snom 821 Quick Start Guide
Inactive identity:
Gray symbol
Input modes:
123:
abc:
ABC: Capital letters
Redial
Directories, call lists,
contact list, favorites
Numerals
Small letters
7
E
N
G
L
I
S
H