MSI P45 Neo Serie Mode D'emploi page 21

ATX 12V Power Connector (2x2-Pin): JPWR2
This 12V power connector is used to provide power to the CPU.
TPM Module Connector: JTPM1 (optional)
This connector connects to a TPM (Trusted Platform Module) module (optional). Please
refer to the TPM security platform manual for more details and usages.
Hardware Overclock FSB Jumpers: JB1, JB2 (optional)
You can overclock the FSB to increase the processor frequency by changing the jumpers
JB1 and JB2. Follow the instructions below to set the FSB.
1 3
JB2
JB1
Default
Important
1. Make sure that you power off the system before changing the jumpers.
2. Overclocking may cause instability or crash during boot, then please restore
the jumpers to default.
2
GND
12V
4
13
14
1
1
1 3
200->266 MHz 200->333 MHz
1
GND
12V
3
1
2
JB2
JB1
3 3
1
266->333 MHz
1 3
200->400 MHz
266->400 MHz
333->400 MHz
En-13