MSI P45 Neo Serie Mode D'emploi page 16

M S-7519 M ainboard
Installing Memory Modules
You can find the notch on the memory module and the volt on the DIMM slot. Follow the
procedures below to install the m em ory m odule properly.
1. The memory module has only one notch on the center and will only fit in the right
orient ation.
2. Insert the memory m odule vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot. The plastic
clip at each side of the DIMM slot will automatically close when the memory module
is properly seated.
Important
You can barely see the golden finger if the memory module is properly inserted in
the DIMM slot.
3. Manually check if the memory m odule has been locked in place by the DIMM slot
clips at the sides.
En-8
Notch
Volt