Speaker; Correct Location; Maintenance - Noaton VEGA Mode D'emploi

Notes on remote control:
Use the central control pad to control the colour and intensity of the LED lighting. Press and hold the up / down
arrows to continuously increase / decrease the intensity of the lighting (or press for step change). Press
and hold the left and right arrows to change the colour temperature from warm white (left) to cool white (right)
(or press for step change). The middle button cycles through warm white, daylight white and cool white
lighting.
After pressing the timer button (TIME), the fan automatically turns off after 1 hour or 2 hours.

5 Speaker

This fan is equipped with a wireless speaker. You can listen to your favourite music by connecting the
speaker to, for example, your mobile phone, laptop, tablet or other device equipped with Bluetooth
technology. Pairing is easy and no key is needed. However, if you phone does require a key, enter 000000
(six zeros). The fan will appear as a new Bluetooth device (Speaker Light) immediately after it is powered.

6 Correct location

•
The fan blows air downward in a cone shape and pushes it across the floor. Use this
information to choose the most suitable place for the fan, taking into account its
function as a ceiling light.
•
The parameters of the input voltage must meet the parameters provided on the
technical label on the device.
•
Make sure that there are no obstacles near the fan that could impede proper airflow
or collide with the unit (such as the top cupboard door etc.).

7 Maintenance

Before performing any maintenance, turn off the fan and disconnect the power supply (ideally by disconnecting
it in the fuse box of the household). Clean the surface of the device by a soft damp cloth.
WARNING:
•
Do not immerse the fan into water.
•
Do not use chemicals, such as detergents, alcohol, thinners or abrasives, to clean the device.
•
Prevent water from getting into inside of the device, especially on electronic components.
Otherwise, there is a risk of electric shock or damage to the device.
EN
29