Renkforce PAM 80A Mode D'emploi page 3

Operating instructions
PAM 80A Monitor Speaker
Item no. 1462446
Intended Use
The monitor speaker is for amplification and playback of audio signals from audio devices. The inputs may
only be connected to the low-level audio outputs of audio devices.
This product is only approved for connection to 220-230 V/50/60 Hz AC via an earthed mains socket.
The product may only be used in enclosed indoor locations, therefore avoid outdoor use. Do not expose to
moisture, for example in bathrooms or similar spaces.
For safety and approval reasons, you may not convert and/or alter the product. If you use the product for
purposes other than those described above, the product may be damaged. Moreover, the improper use
involves risks such as short-circuits, fire, electric shocks, etc. Please read the operating instructions care-
fully and do not discard them. If you pass the product on to a third party, please hand over these operating
instructions as well.
This product complies with the applicable national and European Regulations. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Monitor speaker
• Mains cable
• Operating Instructions
Up-to-date operating instructions:
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside a triangle is used when there is a potential risk of personal injury,
such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating manual which
absolutely have to be observed.
The arrow symbol is used when specific tips and information on handling are provided.
Safety Instructions
Please read the operating instructions carefully and pay particular attention to the safety
instructions. We do not assume liability for injuries/material damages resulting from fail-
ure to observe the safety instructions and the information in these operating instructions
regarding the proper handling of the product. Furthermore, in such cases, the warranty/
guarantee will be null and void.
• All persons operating, installing, setting up, commissioning or servicing this device must be
trained and qualified correspondingly and observe these operating instructions.
• Never touch the mains plug when your hands are wet.
• The device is constructed according to protection class I. Only use a standard mains socket
(220-230 V/50/60 Hz) connected to the public power supply grid with an earthed contact as
the voltage source.
• The device must be set up correctly. Therefore, please follow the operating instructions care-
fully.
• Also observe the safety and operating instructions of any other devices that you intend to
connect to the monitor speaker.
• Make sure the mains cable is not pinched, bent, damaged by sharp edges or otherwise sub-
jected to mechanical strain. Avoid excess thermal stress on the mains cable due to excessive
heat or cold. Do not modify the mains cable. Failure to adhere to these instructions may
lead to damage of the mains cable. A damaged mains cable can result in a life-threatening
electric shock.
• If the cables show damages, do not touch them. First, switch off the appropriate mains socket
(e.g. via the respective circuit-breaker and the RCD) and then carefully pull the mains plug
from the mains socket. Separate the mains cable from the device. Never use the product if
the mains cable is damaged.
• To completely separate the device from the mains, you have to unplug the mains plug from the
wall socket. It is not sufficient to turn off the monitor speaker at the on/off switch.
• Make sure the device is adequately ventilated when in operation. Do not cover ventilation
holes and cooling fins with magazines, table cloths, curtains, or similar. Keep a minimum
distance of 15 cm from other objects.
• Do not place open sources of fire such as burning candles on the device.
• Never pour liquids above electrical devices and never leave objects filled with liquids (e.g.
vases) in the vicinity. You run the high risk of causing a fire or a fatal electric shock. If this is
the case, de-energise the appropriate mains socket (e.g. switch off circuit breaker and RCD)
and then remove the mains plug from the mains socket. Disconnect all cables from the device.
Do not use the product afterwards. Take it to a specialized workshop.
All manuals and user guides at all-guides.com
Controls and Parts
1
2
3
4
5
6
7
8
• The device is not a toy and is not suitable for children. Children are not aware of the potential
dangers involved when using electrical devices.
• Do not store any magnetic storage media such as floppy disks, video tapes, etc. in close prox-
imity to the monitor speaker, as the magnetic field of the speaker might destroy the information
stored on the storage media.
• Do not listen to excessively loud music for long periods of time. This may damage your hearing.
• Do not expose the monitor speaker to high temperatures, dripping water or water spray, strong
vibrations or high humidity.
• Only use the product in a moderate climate, never in tropical climates.
• Do not leave the packaging materials unattended. It may become a dangerous plaything for
children.
• Moreover, please observe the additional safety instructions in the individual chapters of this
operating manual.
• Pay attention to the applicable regulations and laws e.g. for the prevention of accidents, when
using it in commercial or public places. As the operator, you must obtain information from the
authorities in charge and you are responsible for observing the applicable laws and regula-
tions.
• If you are not sure about the correct connection or if questions arise which are not covered by
the operating instructions, please do not hesitate to contact our technical support or another
specialist.
• If you have doubts about how the device should be operated or how to connect it safely,
consult a trained technician.
MASTER control
MIC control
LINE control
TREBLE control
MID control
BASS control
LIMIT display
SIGNAL indicator
9 POWER indicator
10 MIC IN connection
11 LINE IN connection
12 LINE OUT connection
13 POWER switch
14 Mains connection
15 Fuse holder