nedis ACON2510BK Mode D'emploi page 5

Main parts (image A)
1
R/L output
2
AUX output
3
Power indicator LED
4
Coaxial input
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep the packaging and this document
for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged or
defective product immediately.
• Do not drop the product and avoid bumping.
• Do not expose the product to water or moisture.
• Only use the provided power cable.
• Disconnect the product from the power source and other equipment if
problems occur.
• Do not unplug the product by pulling on the cable. Always grasp the plug and
pull.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
Installing the product
-
Make sure all the devices you want to connect have been switched off.
1. Plug a twin R/L cable (not included) into the R/L output A
cable or headphone (not included) into the AUX output A
2. Plug the other end of the cable into your audio output device.
5
Toslink female input
6
DC power port
7
Power cable
5
1
or plug an AUX
2
.