Dust Extraction - Flex MS713 Notice D'instruction D'origine

Dust extraction

WARNING!
Before performing any work on the electric
power tool, pull out the mains plug!
1. Attach the dust bag to the connection
of the sander.
2. Periodically remove dust container from
flange and empty collected dust.
NOTE
A light twist facilitates removal and
attachment of the dust bag.
Tap container lightly to remove compacted
dust. Do not wash container. Dry compressed
air may be used to blow out container.
CAUTION!
Wear safety glasses while using compressed
air.
CAUTION!
Never run sander with dust container or dust
collector assembly removed. Otherwise, very
fine dust particles could be blown into the
eyes.
It is possible to connect a dust extraction unit
using the hose adapter provided.
18
Operating instructions
How to hold sander
Model MS713 is designed to be hold as shown.
Sanding procedure
The normal weight of the machine is
sufficient for efficient sanding. Do not put
additional pressure on the machine. This
would only slow down the speed of the pad,
reducing the sanding efficiency and put an
additional burden on the motor. In addition, it
might cause the sander to jump on the work.
Let the sander do the work.
MS713