Product Description Mechanical Modules; Safety Category; Mechanically Coded Actuators; Actuator J With Self-Adjustment - DOLD SAFEMASTER STS M12M Traduction De La Notice Originale

Product description mechanical modules

SAFEMASTER STS (stainless steel) consists of modules that can be individually combined and adapted to your application. The modularity makes
it possible to build several units into one system or to adapt and/or extend existing systems as required. Purely mechanical locking units can be
integrated wirelessly into the machine and system concept and thus ensure economical and reliable protection in extensive applications.

Safety category

Up to
Cat. 4 / PL e
SIL 3

Mechanically coded actuators

Actuator J with self-adjustment

Actuator CS

Double actuators

SAFEMASTER STS systems can
be used as individual solutions in
applications up to category 4,
Performance Level e according to
EN ISO 13849-1 can be used.
All actuators belonging to the
SAFEMASTER STS system are
also available in the coding level
medium, according to
EN ISO 14119:2013.
When plugged in, the J actuator
is self-adjusting over 4 degrees
of freedom and retains its last
alignment state.
It can have an offset of up to
20 mm to compensate.
The CS actuator is particularly
suitable for harsh and dirty ambient
conditions. In addition, the CS
actuator is designed for applications
with high shear and tensile forces,
so that overload breaks can be
largely excluded.
For applications with Category 4,
Performance Level e, SAFEMASTER
STS units can also be equipped with
2 actuators.

EC type tested

Actuator C with angle compensation

CW bolt actuator

Actuator locking force

Monitoring of 2 doors with one unit

15
SAFEMASTER STS systems are
logic units for safety functions
according to Annex IV, S21 and are
EC type tested in accordance with
legal requirements.
The C actuator with adjustable
actuator angle is spring-mounted.
It returns to its set state after a load.
The CW bolt moves under the
mounted unit, making the slider
suitable for securing hinged doors
with both left and right stop.
It is designed in such a way that
shear forces cannot act directly on
the STS unit. It is particularly suitable
for applications, where high forces
can act on the STS units, e.g. in
double swing doors.
The holding force F according to
zh
EN ISO 14119:2013 is 4000 N.
(plastic versions 2000 N)
SAFEMASTER STS units with
double actuators can be used to
monitor 2 adjacent accesses.
SAFEMASTER STS-M12M / 10.12.19 en / 137A