Description; Installation Examples; Approvals And Markings; Design And Operation - DOLD SAFEMASTER STS/K YRX/K Mode D'emploi

Safety Technique
SAFEMASTER STS/K
Safety switch- and key interlock system
Locking module YRX/K, YAX/K, YRH/K
Locking module YRX/K, YAX/K
without manual unlockin

Description

Locking modules YRX/K, YAX/K and YRH/K are assembled with other
modules to an STS/K unit. They are used for access authorizations and
monitoring of actuator/key positions, doors, entries and locking module
positions of separating guards. It must therefore be ensured in the case of
authorization applications that there is no hazard remaining when inserting
the actuator / key and access can be unlocked.

Installation Examples

YRX11BM/K YAX10B01M/K
All technical data in this list relate to the state at the moment of edition. We reserve the right for
technical improvements and changes at any time.
Locking module YRH/K
with manual unlockin
YRX10BM/K
STS/K-System Benefits
• EU-Test certificate according to the directive 2006/42/EG, annex IX
• For safety applications up to PLe/Category 4 according
to DIN EN ISO 13849-1
• Modular and expandable system
• Rugged composite version of stainless steel and plastic design
• Wireless mechanical safeguarding
• Combines the benefits of safety switch, solenoid locking and
key transfer in a single system
• Easy installation through comprehensive accessories
• Protection against lock-in
• Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Features
• Locking module for access authorization applications
• To monitor
- Actuator / key position
- Doors and entries
- Locking module position
• Module expansions possible only above the module
• Standby current or load current principle
• Optionally with manual unlocking
• With integrated LEDs for status indication
• This modules are also available in stainless steel

Approvals and Markings

Design and Operation

A robust and flexible solenoid lock, which monitors the safe position of
one or more entries in a system, for instance, of a guard or protective door.
For this purpose, the module is used in connection with other mechanical
modules such as key modules 10/K, 10S/K or actuator modules such as
K/K or padlock module W/K, installed directly above.
ATTENTION! !
Combination with other mechanical STS/K modules is not
!
permitted! This may block the unit.
Key and padlock modules can be installed either above
or below an actuator module. Operation of the access
can only be released when the safety of the system is
ensured for the operating personnel.
The Locking modules YRX/K, YAX/K and YRH/K are typically used in
systems where access rights are distributed via SAFEMASTER STS/K
keys. For
access authorizations users and service employees receive an key enab-
ling entry to predefined plant area. YRH10BM/K represents an example
of such a unit. The plant must first be in a safe condition here before the
module unlocks, a key can be inserted and a door or similar can be opened.
With the unit YAX11BM/K a key must be inserted while the condition is safe
and another key must be pulled or a key changed before an access can
be opened. These modules can also be used without actuator module
only to release key entries in a key interlock system if they are used here
as access authorizations.
11
SAFEMASTER STS/K Locking module YRX, YAX, YRH / 16.11.20 en / 295A
C US