FS M6200 Série Guide De Démarrage Rapide page 20

Step 6: Enter correct user name and password (For the administrator, the default login user name is
"root", and the default password is "public"), as shown in the figure below:
M6200 Series NMS
XXX.XXX.XXX.XXX:9090
!
Step 7: Click login, you are now ready to configure M series platform
NOTE:
Refer to the M SERIES NETWORK MANAGEMNT USER MANUAL online for further
information
Troubleshooting
Module LEDs Working Abnormally
1. Check the power cable connections at the M6200 series managed chassis and the power source.
2. Make sure that all cables are used correctly and comply with the power specifications.
3. Make sure that business modules are in the right position in the M6200 series managed chassis.
Accessing the Web-based Con guration Page Unsuccessfully
1. Check MGMT ports LED on the NMU module and make sure the Ethernet cable is connected
properly.
2. Try another port on the NMU module and make sure the Ethernet cable is suitable and works
normally.
3. Pow M6200 series managed chassis. After a while, power it on again.
4. Make sure the IP address of your NMS server is correctly configured.
5. If you still cannot access the configuration page, please reinitialize NMS server to its factory
defaults.
M Series NMS
Copyright © 2020 by FS.COM All Rights Reserved.
User Name
Password
Reset
Login
19