RCA 7L400MDV Mode D'emploi page 29

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

No sound or distorted sound.
Make sure your mobile DVD/VCP player is connected properly. Make sure all cables are securely inserted into the appropriate jacks.
If you connected an audio or audio/video component, make sure you chose the correct input setting on the receiver and unit.
Can't advance through a movie
You can't advance through the opening credits and warning information that appear at the beginning of movies because the disc is
programmed to prohibit that action.
The invalid symbol (hand icon) appears on screen
The feature or action cannot be completed at this time because:
– The disc's software restricts it.
– The disc's software doesn't support the feature (e.g., angles).
– The feature is not available at the moment.
– You've requested a title or chapter number that is out of range.
Picture is distorted
The disc might be damaged. Try another disc.
It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan
Some discs have sections that prohibit rapid scanning, or title and chapter skip.
If you try to skip through the warning information and credits at the beginning of a movie, you won't be able to. This part of the movie is
often programmed to prohibit skipping through it.
Make sure you are using the correct buttons on the remote: for DVD, the buttons are on the top half of the remote. For videocassettes, the
buttons are on the bottom of the remote.
Subtitle and/or audio language is not the one selected from the initial setting
If the subtitle and/or audio language does not exist on the disc, the initial settings will not be seen or heard.
Camera angle cannot be changed
Some discs don't have the multi-camera angle system, and some discs only have it in certain parts of the movie.
Remote Control Doesn't work
Place the remote control extremely close to the sensor on your mobile DVD/VCP player.
Maybe batteries are weak or dead. Put new batteries in the remote.
Make sure you are using the correct buttons on the remote: for DVD, the buttons are on the top half of the remote. For videocassettes, the
buttons are on the bottom of the remote.
Chapter 4
Chapter 4: Other Information
27

Publicité

Table des Matières
loading

Produits Connexes pour RCA 7L400MDV

Table des Matières