Disc Navigation; Defaults; Sub Volume - RCA 7L400MDV Mode D'emploi

Disc Navigation

The Disc Navigation screen appears automatically when you insert an mp3 into the player. The default is set to
on. To turn the Disc Navigation screen off:
1. Press DVD SETUP (the SETUP MENU appears).
2. Press the down arrow button until DISC NAVIGATION is highlighted (the options appear).
3. Press the right arrow button to access the DISC NAVIGATION options.
4. Press the up arrow button to highlight NO MENU, then press ENTER.
5. Press DVD SETUP to exit.
Note: If you turn Disc Navigation off, you won't be able to access the mp3 play mode options.
To turn Disc Navigation back on, follow steps 1-3. Press the down arrow button to highlight WITH MENU.
Then press DVD SETUP to exit.

Defaults

Use the Default feature to reset ALL menu settings to the factory defaults.
1. Press DVD SETUP (the SETUP MENU appears).
2. Press the down arrow until DEFAULTS is highlighted (RESET appears).
3. Press the right arrow to highlight RESET, then press ENTER.
4. Press DVD SETUP to exit.

Sub Volume

Use the Sub Volume feature to boost or cut the decibels going into headphones or an amplifier.
1. Press DVD SETUP (the SETUP MENU appears).
2. Press the down arrow until SUB VOLUME is highlighted.
3. Press the right arrow to access the SUB VOLUME options.
4. Press the up or down arrow button to change the volume, then press ENTER.
5. Press DVD SETUP to exit.
Chapter 3
Chapter 3: DVD Menus
25