Subaru E101SVA002 Instructions D'installation page 5

Left Front Door Sill
Plastic Panel
FRT Sill Plate Front Template
13 Adhere To Surface
Starting in the center, squeegee the top surface of the Sill Plate
onto the surface of sill area as shown, using firm, overlapping
squeegee strokes. Carefully remove template and save for use
on the right side of vehicle.
Left Rear Door Sill
Plastic Panel
RR Sill Plate Front Template
15 Sill Plate Alignment
Start by aligning the edge of Sill Plate with the template as shown.
Make sure the top edge of the Sill Plate is aligned with the plastic
panel and lay into position.
NOTE: If mislocated, lift straight up and reposition into correct location.
DESCRIPTION
Side Sill Plate
FRT Sill Plate Rear Template
RR Sill Plate Rear Template
*
(Repeat Steps 9-16 for right side of vehicle.)
ISSUE
00
14 Separate Liner
Moving to the Left Rear Sill Plate, remove liner from Sill Plate. After
removal of part liner, to prevent contamination, limit touching
adhesive side of Sill Plate by handling on the edges.
Left Rear Door Sill
Plastic Panel
RR Sill Plate Front Template
16 Adhere To Surface
Starting in the center, squeegee the top surface of the Sill Plate
onto the surface of sill area as shown, using firm, overlapping
squeegee strokes. Carefully remove template and save for use
on the right side of vehicle.
DATE
SUBARU OF AMERICA
10/5/2021
Sill Plate
Adhesive side of Sill Plate
Liner
RR Sill Plate Rear Template
PAGE
5