Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Left Front Door Sill
Plastic Panel
5
Adhere To Surface
Starting in the center, squeegee the top surface of the Sill Plate
onto the surface of sill area as shown, using firm, overlapping
squeegee strokes. Carefully remove template and save for use
on the right side of vehicle.
Left Rear Door Sill
Plastic Panel
7
Sill Plate Alignment
Start by aligning the edge of Sill Plate with the template as shown.
Next, pivot the top edge of the Sill Plate against the plastic panel
and lay into position.
NOTE: If mislocated, lift straight up and reposition into correct location.
DESCRIPTION
Side Sill Plate
Masking
Tape
FRT Sill Plate Template
Masking
Door Catcher
Tape
RR Sill Plate Template
*
(Repeat Steps 1-8 for right side of vehicle.)
ISSUE
00
6
Separate Liner
Moving to the Left Rear Sill Plate, remove liner from Sill Plate. After
removal of part liner, to prevent contamination, limit touching
adhesive side of Sill Plate by handling on the edges.
Left Rear Door Sill
Plastic Panel
8
Adhere To Surface
Starting in the center, squeegee the top surface of the Sill Plate
onto the surface of sill area as shown, using firm, overlapping
squeegee strokes. Carefully remove template and save for use
on the right side of vehicle.
DATE
SUBARU OF AMERICA
10/5/2021
Sill Plate
Adhesive side of Sill Plate
Liner
Masking
Door Catcher
Tape
RR Sill Plate Template
PAGE
3
Publicité
Table des Matières
