Further Information; Warranty Information - Axis Communications Q7436 Guide D'installation

AXIS Q7436 Video Encoder Blade
3. Keep the Control button pressed until the Power indicator turns green and the 6 Status
indicators turn amber (this may take up to 15 seconds).
4. Release the Control button. When the Status indicators display green (which can take up
to 1 minute) the process is complete and the unit has been reset.
5. Re-assign the IP addresses using one of the methods described in this document.
Note
To reset a single channel to the original factory default settings, use the button provided in
that unit's web interface.
It is also possible to reset parameters to factory default via the web interface. Go to Setup
> System Options > Maintenance.

Further Information

The User Manual is available at www.axis.com
Visit www.axis.com/techsup to check if there is updated firmware available for your network
product. To see the currently installed firmware version, go to Setup > About.
Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and
guides.

Warranty Information

For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty/
13