Further Information; Warranty Information - Axis Communications T8081 PS57 Guide D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Read all the instructions before installing the product. The power supply module can be replaced
while the chassis is powered up.
DANGER
Risk of electric shock.
• The slots shall only be used for AXIS T8081 power supply modules. Do not insert anything
else into the slot in the chassis.
• Empty slots shall be covered using the supplied covers.
1. To remove an old power supply module, push the handle to the right and pull out the
module. Dispose of it according to local laws and regulations.
2. Slide the AXIS T8081 PS57 Module 1000W into the slot and make sure that the module
snaps into place.
3. Verify that the LED:s on the power module indicate normal operation.

Further Information

For the latest version of this document, see www.axis.com
Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and
guides.

Warranty Information

For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty/
AXIS T8081 PS57 MODULE 1000W
9

Publicité

Table des Matières
loading

Table des Matières