Install The Faucet - Kohler K-6127 Guide D'installation

Setscrew

3. Install the Faucet

IMPORTANT! Be careful not to damage the O-rings on the
escutcheons during this procedure. The O-rings are pre-installed in
the escutcheons.
Carefully slide the faucet assembly onto the escutcheons.
Using a 1/8" hex wrench, secure the faucet assembly to the
escutcheons with setscrews. The setscrew must be flush or
recessed.
NOTE: If the setscrews are not flush: Loosen the setscrews, then
remove the faucet assembly from the escutcheons. Reinsert the
faucet assembly, then retighten the setscrews.
4. Installation Checkout
Turn both handles clockwise to the OFF position.
Verify that all connections are tight.
Turn on the main water supply.
Check all connections for leaks. Repair as needed.
Turn both handles to the ON position to run water through the
faucet. Allow the water to run through the spout to remove any
debris.
Turn both handles to the OFF position.
1071382-2-A
Aerator Tool
Not Correct Correct
6 Kohler Co.