Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CDD 500
DESCRIPTION
FRONT PANEL
1.
POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch again.
2.
EJECT BUTTON
Press EJECT to eject CD from slot in charger. During the playback, the CD cannot be ejected
3.
CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started
4. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.
5.
PGM BUTTON
Use this button to program a playlist
-
Press and hold this button
-
Select track ( or files ) with track selection wheel
-
When you have selected the track, press PGM button again to validate your choice
-
Repeat operation 2 and 3 for all track ( or files ) you want to program
-
Press play to start the playlist playback
6.
BPM BUTTON
Tap the BE.AT COUNTER to the rhythm of the music at least 3 times, for more accurate reading tap it between 6 and 10 times.
7.
TRACK SELECTION WHEEL
Use this wheel to select track ( or file ). Press this button after selet the track to validate your choice.
8.
JOG AND SHUTTLE
Shuttle : Use the dial to select the scanning direction and speed. The disc is scanned in the forward direction when the shuttle dial is
turned clockwise from the neutral position, in the reverse direction when the shuttle dial is turned counterclockwise. The scanning
speeds up when the shuttle dial is turned faster.
Jog : In pause mode, if you turn the jog, the point at which the sound is being produced moves by a number of frames corresponding to
the number of clicks. Clockwise moves the point forward, counterclockwise moves the point backward.
9.
CD / USB SELECTION BUTTON
Use to select either CD, either USB device
10. REPEAT BUTTON
One press and player will be read onlu one track ( or file ) in loop
Two presses and player will be read all tracks ( or files ) in loop
Three presses, Normal playback
11. SINGLE / CONTINU BUTTON
Press these to switch between the SINGLE and CONTINUOUS play mode. In SINGLE mode, after each track, the unit stop the reading. In
continue mode, the unit read all track and stops
12. TIME BUTTON
Used this knob to choose the time mode : Elapsed time or remaining time.
© Copyright LOTRONIC 2012
BSTDJ.COM
Page 7
Publicité
Table des Matières
