Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8. PROBLEMS AND SOLUTIONS
Problems
The bubble system
does not seem to
work
The heating system
does not seem to be
working
The filtration system
does not seem to be
working
Spa leaking
The water is not
clean
Probable Causes
► The air pump is too hot
► There is a problem with the
electrical box
► The temperature is set too
low
► The cartridge is dirty
► The water level is not not
good
► Heating element failure
► The cartridge is dirty
► There is a problem with the
electrical box
► Insufficient electrical
voltage or incorrect frequency
► Spa is torn or punctured
enough ► Filtration time
►The cartridge is dirty
► Wrong parameters water
► Unplug the air pump. Once the air pump has
cooled, reconnect it and press the "Bubble"
button to activate it
► If the system does not reset, call for repair
► Choose a correct temperature setting (20 to
42 ° C)
► Clean / replace the cartridge
► Add water to specified levels
► Ask for repair service
► Clean / replace the cartridge
► If the system does not reset, call for repair
► Have a professional electrician check that the
supply voltage and frequency are normal male
home
► Use a patch
► Increase filtration time
►Clean / replace the cartridge
► Please refer to the instructions of the water
treatment product manufacturers
23
Solutions
Publicité
Table des Matières
