auna Scala VCD Mode D'emploi page 56

EN
56
press the Select dial to select 'Last listened' or turn and press the Select
dial to choose a radio station from the preset list.
Note: Skip this step if you are setting a Tone alarm.
7. Turn and press the Select dial to select 'Duration'. Turn and press the
Select to set the duration that the alarm will sound in minutes.
8. Turn and press the Select dial to select 'Volume'. Turn and press the
Select the dial to set the volume of the alarm.
Sleep function
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. Press and hold the Menu button on main unit or remote control and turn
and press the Select dial to select 'Main Menu'.
2. Turn and press the Select NAVIGATE or use the Select buttons on the
remote control to select 'SLEEP' .
3. To activate the sleep function, press the Select NAVIGATE or use the
Select buttons on the remote control to repeatedly. The time will
change in the below sequence on every press: Sleep off-15mins - 30mins
- 45mins - 60mins - 90 mins
Time and date settings
The clock will automatically set itself using your digital audio or FM radio
signal. If the time or date does not update automatically, you can manually
set it using this option.
Note: Any time or date updates received by a digital broadcast will override
manual settings.
Setting the time and date manually
1. Press and hold the Menu button to view the main menu.
2. Turn and press the Select NAVIGATE to select 'System settings' > 'Time/
Date'.
3. Turn and press the Select NAVIGATE to choose 'Set Time/Date'.
4. Turn and press the Select NAVIGATE to set the day of the month. Repeat
to set the month and year.
5. Turn and press the Select NAVIGATE to set the hour. Repeat to adjust the
minutes.
Note: If you have set the time format to 12 hour time format, make sure that
you select the 'AM' or 'PM' version of the hour before pressing the Select
NAVIGATE.