auna Scala VCD Mode D'emploi page 54

EN
54
High-Speed Music Search
During playback press & hold the PREVIOUS or NEXT button to start high-
speed searching.
When you release the PREVIOUS or NEXT button normal speed playback
will resume.
Repeat Playing
You can use the setting to repeat the track that is currently playing or the
entire CD. To change the 'Repeat' setting:
1. Press the buttons on the remote control to select one of the following
repeat options:
Repeat one: Select this option if you want to repeat the track that is
currently playing.
Repeat all: Select this option if you want to repeat the entire CD.
Normal: Select this option if you don't want to repeat any tracks or the
entire CD.
Random Play
During playback press the
'Shuffle'. to play music in random order. The display will show
button again to resume normal playback.
Programmed Playback
This unit can be programmed to play a sequence of tracks selected.
1. Insert a disc and in stop mode press the PROG button. "P-01" is shown
with "01" flashing in "T-01" shown.
2. Press the PREVIOUS or NEXT button to select the desired track.
3. Press the OK button to save the desired track.
4. Repeat steps 2-4 to program up to 99 programmed tracks.
5. Press the CD PLAY/PAUSE button to play according to the programmed
track.
6. To clear the program play, press the STOP button twice or change to
another mode.
7. During program play you can also do the "Repeat One" or "Repeat All"
operation. But during the program play, random play is not supported.
ID3 Tag Display (MP3 file only in which the ID3 Tag information is included)
Press the INFO button will toggle the ID3 Tag display on/off. When it is on,
the MP3 track's title, artist and album details will be displayed.
button on the remote control to choose
. Press the