Maintenance Instructions - Intermec CK 3 Serie Manuel D'instructions

INSTALLING THE BATTERY ADAPTER
Connect to vehicle
power outlet
OPERATING INSTRUCTIONS
This device allows you to power and charge your CK3 through
the vehicle power port. However, before using the vehicle battery
adapter, make sure that the unit is installed as shown in
"INSTALLING THE BATTERY ADAPTER."
Note: The vehicle battery adapter has a user-replaceable fuse.
CAUTION: Risk of fire. Do not replace any vehicle fuse
with a rating higher than recommended by the vehicle
manufacturer. This product is rated to draw a maximum of
3.5 amperes from a 12 to 24 V vehicle outlet. Ensure that the
electrical system in your vehicle can supply this product
without causing the vehicle fusing to open. This can be
determined by making sure the fuse in the vehicle which
protects the outlet is rated higher than 3.5 amperes.
Information on the vehicle fuse ratings is typically found in
the vehicle operator's manual.

MAINTENANCE INSTRUCTIONS

Disconnect before cleaning. Do not immerse. Do not
disassemble. All other servicing should be performed by qualified
service personnel.
4
CK3c1, 1007CP01, 1007CP02, or 1007CP02L, doing so may
result in risk of battery explosion or fire.
Connect to CK3
through AA23
adapter