Publicité
Liens rapides
ULTRA-MAX GAS GRIDDLE
824M-LP
836M-LP
848M-LP
860M-LP
872M-LP
WARNING:
Improper installation,
adjustment, alteration, service or
maintenance can cause property damage,
injury or death.
operating and maintenance instructions
thoroughly before installing or servicing
this equipment.
FOR YOUR SAFETY: Do not store or use
gasoline or other fl ammable vapors or
liquids in the vicinity of this or any other
appliance.
Star
Manufacturing
International Inc.
10 Sunnen Drive
St. Louis, MO 63143
Phone: (314) 781-2777
Fax: (314) 781-2714
MODELS
824T-LP
836T-LP
848T-LP
860T-LP
872T-LP
Read the installation,
824TS-LP
836TS-LP
848TS-LP
860TS-LP
872TS-LP
WARNING: This appliance shall be installed
in accordance with current regulations and
used only in well-ventilated space. Refer
to instructions before installing and using
this appliance.
In addition, there should be posted, in a
prominent location, detailed instructions
to be followed in the event the operator
smells gas. Obtain the instructions from
the local gas supplier.
1
Installation
and
Operating
Instructions
2M-Z7924 Rev. A 3/15/2006
824TSCHS-LP
836TSCHS-LP
848TSCHS-LP
860TSCHS-LP
872TSCHS-LP
Publicité
Manuels Connexes pour Star ULTRA-MAX 824M-LP
Sommaire des Matières pour Star ULTRA-MAX 824M-LP
- Page 1 Star Manufacturing Installation International Inc. Operating 10 Sunnen Drive Instructions St. Louis, MO 63143 Phone: (314) 781-2777 Fax: (314) 781-2714 2M-Z7924 Rev. A 3/15/2006 ULTRA-MAX GAS GRIDDLE MODELS 824M-LP 824T-LP 824TS-LP 824TSCHS-LP 836M-LP 836T-LP 836TS-LP 836TSCHS-LP 848M-LP 848T-LP 848TS-LP 848TSCHS-LP...
-
Page 2: Safety Symbol
RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. Star reserves the right to change specifi cations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. - Page 3 SPECIFICATIONS 824M-LP Type: Manual Valve 2 Controls, 60,000 BTUH, 573 sq. in. (3697 sq. cm) Grid Area Approximate Weight: Installed - 214 Lb s (97.0 kg), shipping - 244 Lbs (110.6 kg) Dimensions: 24" - Width, 32 3/8" - Depth, 18" - Height (61 cm - Width, 82.2 cm - Depth, 45.7 cm - Height) 836M-LP Type: Manual Valve...
- Page 4 860T-LP Type: Throttling Control 5 Controls, 150,000 BTUH, 1433 sq. in. (9242 sq. cm) Grid Area Approximate Weight: Installed - 550 Lbs (249.2 kg), shipping - 615 Lbs (278.7 kg) Dimensions: 60" - Width, 32 3/8" - Depth, 18" - Height (152.4 cm - Width, 82.2 cm - Depth, 45.7 cm - Height 872T-LP Type: Throttling Control...
- Page 5 836TSCHS-LP Type: Snap Action Control With Safety Pilot and Chrome Plate 3 Controls, 90,000 BTUH, 860 sq. in. (5545 sq. cm) Grid Area Approximate Weight: Installed - 333 Lbs (150.9 kg), shipping - 375 Lbs (169.9 kg) Dimensions: 36" - Width, 32 3/8" - Depth, 18" - Height (91.4 cm - Width, 82.2 cm - Depth, 45.7 cm - Height) 848TSCHS-LP Type: Snap Action Control With Safety Pilot and Chrome Plate...
- Page 6 GENERAL INSTALLATION DATA NOTICE CAUTION When this appliance is installed with casters, it must be installed with the casters supplied, a connector This equipment is designed and sold for commercial complying with either ANSI Z21.69 or CAN/CGA-6.16 use only by personnel trained and experienced in its and a quick-disconnect device complying with either operation and is not sold for consumer use in and ANSI Z21.41 or CAN1-6.9.
- Page 7 LEVELING UNIT CAUTION This griddle is supplied with 4 feet or fl oor stand legs which must be screwed into the body. Unit DO NOT INSTALL WITHOUT ATTACHING FEET must be level. Level unit by adjusting the (4) feet OR SUPPLIED STAND LEGS AND SHELF - DO which have an adjustment of 1-3/4"...
- Page 8 GAS PIPING CHECKING FOR GAS LEAKS Gas piping shall be of such size and so installed as Check entire piping system for leaks. Soap and to provide a supply of gas suffi cient to meet the full water solution or other material acceptable for the gas input of the appliance.
- Page 9 PILOT FLAME ADJUSTMENT ELECTRICAL CONNECTION FOR SNAP The griddles are equipped with standing pilots and ACTION AND CHROME SURFACE MODELS should be lit immediately after the gas is turned on. ONLY Snap action and chrome surface griddles are equipped with a three-prong grounding plug. The unit is MANUAL VALVE AND THROTTLING designed for use on a 120 volt 15 amp 50/60 cycle...
- Page 10 GRIDDLE CARE (NON-CHROME CAUTION SURFACES) It takes very little time and effort to keep the griddle 1. Never use pumice, griddle stones, or abrasives attractive and performing at top effi ciency. If grease on the surface. is permitted to accumulate, it will form a gummy cake 2.
- Page 11 5 years against manufacturing defects to the original owner from the date of installation. This limited warranty is void if it is determined by Star Manufacturing International Incorporated or one of its authorized representatives that the chrome surface has...
- Page 12 LIMITED EQUIPMENT WARRANTY All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies.
-
Page 14: Parts List
ALL TS/TSCHS 2C-Z8547 BOLT, KNOB STOP IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc. - Page 15 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 16 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 17 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 18 REGULATOR (4” AND 10”) ALL TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 21 FITTING 3/8 CC X 1/4 MPT 872T IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 27 2K-Z4611 ELBOW 3/4 NPT 824TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 28 836TS/TSCHS N2-30409 CORD SET 836TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 29 848TS/TSCHS N2-30409 CORD SET 848TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 30 NIPPLE 3/4 NPT X 22 1/2 860TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
- Page 31 NIPPLE 3/4 NPT X 22 1/2 872TS/TSCHS IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.