stayer MULTI DRILL 130 Instructions D'emploi page 23

wire come in contact with the work.
2. If heavier pressures are used, the wires will be
overstressed, resulting in a wiping action; and if this is
continued, the life of the brush will be shortened due to wire
fatigue.
INCORRECT:
Excessive pressure can cause wire breakage.
3. Apply the brush to the work in such a way that as much of
the brush face as possible is in full contact with the work.
Applying the side or edge of the brush to the work will result
in wire breakage and shortened brush life.
CORRECT:
Wire tips doing the work.
Polishing Accessories
These include an impregnated polishing point and an
impregnated polishing wheel for bringing metal sur faces to
smooth finish; a felt polishing tip and felt polish ing wheel,
and cloth polishing wheel, all used for polishing plastics,
metals, jewelry and small parts. Also included in this group
is a polishing compound for use with the felt and cloth
polishers.
Polishing points make a very smooth surface, but a high
luster is obtained using felt or cloth wheels and polishing
compound. For best results polishing accessories
should be used at speeds not greater than 8.000 RPM.
Aluminum Oxide Abrasive Wheels
Use to remove paint, deburr metal, polish stainless steel
and other metals. Available in fine and medium grits. 1/8"
shank.
Sanding Accessories
Sanding discs in fine, medium and coarse grades are made
to fit mandrel. They can be used for nearly any small
sanding job you might have, from model making to fine
furniture finish ing. In addition, there is the drum sander, a
tiny drum which fits into the Rotary Tool and makes it
possible to shape wood, smooth fiberglass, sand inside
curves and other diffi cult places, and other sanding jobs.
You replace the sanding bands on the drum as they
become worn and lose their grit. Bands come in fine
medium and coarse grades. Flapwheels grind and polish
flat or contoured surfaces. They are used most effectively
as a finishing sander after heavier surface sanding and
ENGLISH
20
material removal is completed. Flapwheels come in fine
and coarse grades. Buffs are a great finishing accessory for
cleaning and light sanding. They work effectively on metal,
glass, wood, aluminum and plastics. Do not exceed 8.000
RPM in speed. 1/8" shank.
Grinding Wheel
Use for deburring, removing rust, and general purpose
grinding. Use with Mandrel.
Cutting Wheels
These thin discs of emery or fiberglass are used for slicing,
cutting off and similar operations. Use them for cutting off
frozen bolt heads and nuts, or to reslot a screw head which
has become so damaged that the screwdriver won't work in
it. Fine for cutting BX cable, small rods, tubing, cable and
cutting rectangular holes in sheet metal.
Drywall Cutting Bit
Gives you fast, clean cuts in drywall.
Spiral Cutting Bit
Cuts through all types of wood and wood composites.
7.- Service
After-sales Service and Customer Assistance
Our after-sales service responds to your questions
concerning maintenance and repair of your product as well
as spare parts.
Our customer service representatives can answer your
questions concerning possible applications and adjustment
of products and accessories.
Stayer Ibérica S.A.
Area Empresarial de Andalucía - Sector 1
Calle Sierra de Cazorla 7
28320 Pinto, Madrid (Spain)
Disposal
The machine, accessories and packaging should be sorted
for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According the European Guideline 2002/96/EC
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
s e p a r a t e l y a n d d i s p o s e d o f i n a n
environmentally correct manner.
20