CONTINENTAL EDISON CERP800B Manuel D'instructions page 16

CHOOSING THE RIGHT ACCESSORY
SPEED CONTROLS
This machine has "0-10 speed", "0", "P" controls.
(0-10 variable speed controls): from Min speed to Max speed
("0" level): OFF, stop the machine
("P" mode level): Pulse function
After install the accessory you need, before plug in, make sure
the knob is switched to "0" level. Then turn the knob to the speed
you need.
"0-10 speed" function:
Slow speed: turn the knob to the beginning.
Fast speed: turn the knob till the end.
WARNING:
If using Hook (I), the selected speed cannot more than speed 4.
If using Beater (H), the selected speed cannot more than speed
8.
If using Whisk (G), recommend using the speed 8-10.
"Pulse" function:
Turn the knob anticlockwise to "P", the machine will start to
work under max speed. Once loosen your hand, the knob will
turn back to "0" position automatically and stop the machine.