Safety Instructions - Lindy Switch 2 Port Dual Head DP 1.2 KVM Manuel Utilisateur

User Manual

Safety Instructions

! WARNING !
Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which
may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 - 240
VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type
and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it
is firmly secured in place and does not detach by pulling before installing into a power socket.
To reduce risk of fire, electric shocks or damage:
Do not open the product nor its power supply. There are no user serviceable parts inside.

Only qualified servicing personnel may carry out any repairs or maintenance.

Never use damaged cables.

Do not expose the product to water or places of moisture.

Do not use this product outdoors it is intended for indoor use only.

Do not place the product near direct heat sources. Always place it in a well-ventilated place.

Do not place heavy items on the product or the cables.

Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply
To connect an adapter, place the desired adapter over the power supply, push and twist. To disconnect
the adapter, push the small button on the adapter and twist.
English