Walmag NEO Mode D'emploi page 6

EN
OPERATING AND MAINTENANCE INSTRUCTIONS FOR NEO AND NEOHOT LINE
PREFACE
You have purchased a WALMAG MAGNETICS lifting magnet.
We thank you for the trust you have placed in our product.
These instructions contain all the information required for safe
and optimum use of the lifting magnet. Read the instructions
carefully and follow the directions. Keep the instructions in a
safe place close to the workplace.
On delivery check that the magnet is undamaged and complete.
If the equipment is damaged or incomplete contact your
supplier immediately.
NEVER USE A DAMAGED OR INCOMPLETE MAGNET!
NEO and NEOHOT are guaranteed for a term of 60 months on the magnetic system. The guarantee is not applicable to shortco-
mings that can be wholly or partially attributed to:
+
failure to comply with the operating and maintenance instructions or use considered as being other than normal
+
ormal wear
+
modification or repairs not performed by WALMAG MAGNETICS or authorised agent
In all correspondence regarding your lifting magnet always state the information displayed on the type plate.
TYPE
lenght (mm)
width (mm)
height incl. lifting eye (mm)
weight (kg)
tested lifting capacity (kg)
workload limit for plates (kg)
workload limit pipe and tube (kg)
Ø min/max (mm)
IN CASE OF VERTICAL HANDLING IS THE LOAD CAPACITY LIMITED TO ONLY APP. 20%. CARRY OUT THE TEST
BEFORE YOU START WITH MANIPULATION!
150 300
93
60 100
120 180
3
470 1000
150 300
65
40/100 60/200
3
2
1
4
5
6
THE COMPLETE DELIVERY CONSISTS OF
600
152 246
120
180
10 21
1900
600
150 300
65/200 100/300
NAMES OF THE MOST IMPORTANT PARTS OF THE
LIFTING MAGNET
1. Magnet
2. Instruction plate + type plate
3. Lifting eye
4. Handle
5. Handle lock plate
6. Pole shoes
MAGNET NEO OR
NEOHOT LINE
OPERATING AND
MAINTENANCE INSTRUCTIONS
INCL. EC DECLARATION
OFCONFORMITY
TEST CERTIFICATION
1000 1500
306 374
146 165
236 273
40 69
3200 4700
1000 1500
500 750
150/350
2000
478
165
273
90
6200
2000
1000
150/350