Put Batteries In The Remote; Complete The Interactive Setup; Set The Menu Language; Complete Auto Channel Search - RCA F27350 Mode D'emploi

Put Batteries in the Remote

1. Remove the battery compartment cover on the remote.
2. Insert new batteries. Match the polarities (+ and -) on the batteries with the diagram on the remote.
3. Put the battery compartment cover back on the remote.
Turn on the TV
Press the TV button on the remote control or the POWER button on the TV (the first screen of the
Interactive Setup appears). The menu screens "time out" after a period of time if you don't make a
selection. The tips in this section tell you how to access the Setup menu screens manually.
Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. "TV mode" means
that the buttons on the remote control operate the TV's functions.

Complete the Interactive Setup

The menu system in your TV allows the TV's features to work properly. The first time you turn on your TV,
the setup screens appear automatically. The TV will prompt you, you answer, and the TV makes the
appropriate adjustments.
SETUP
Select the language to be used
in these menus.
1 English
2 Español
3 Français
Use the arrow buttons on the remote to
highlight an option.
SETUP
Would you like the TV to search
for all available channels?
1 Search for channels
2 Skip this step
Press OK to select.
Chapter 1

Complete Auto Channel Search

The TV will search for all channels viewable through your
antenna or cable TV system. This is called "auto programming."
1. Press OK to tell the TV to begin searching for channels. A
2. When the screen tells you the search is complete, press
Illustrations contained in this document are for representation only.
Connections and Setup

Set the Menu Language

1. Use the arrow buttons on the remote to highlight your
preferred language for the menu system.
2. Press OK to select that language.
progress report appears on the screen.
OK.
5