Working Area; Personal Safety; Tool Usage And Duty Of Care - Monti MBX DIE BLASTER Mode D'emploi

® ®
MBX
Die Blaster
4.

Working area

1. Keep working area clean. Cluttered working areas and benches signify a risk of injury.
2. Never allow children, unauthorised individuals or individuals without safety glasses and other protective equip-
ment to enter the working area.
3. Always operate tool in a well ventilated working area.
4.1

Personal safety

1. Wear suitable protective clothing.
trapped by moving parts. Wear gloves and shoes with non-slip soles. Protect long hair with a head band or hair
net to prevent the trapping of hair by moving parts.
2.
Always wear safety glasses, face mask, hearing protection, gloves and suitable protective clothing!
3.
Ensure the tool can be held safely during operation. Always ensure you are standing firmly and securely.
4.2

Tool usage and duty of care

®
1. After fitting MBX accessories such as the adaptor system and Die Blaster
wrench. Always ensure the hex socket wrench is removed prior to switching on the tool.
2.
Avoid unintentional switching on of the tool.
Ensure the starter lever is not actuated on connection to the compressed air pipe.
3. Exercise care. Handle tool with care. Use your common sense.
4. Never
operate this tool or any other tool if you are tired.
5. Work at a distance to ensure other individuals cannot be injured by objects thrown off. During operation, nobody
should stand in front of or beside the user.
6.
Maintain tool carefully. Follow the instructions on lubrication and the replacement of accessories. (See section
5, Compressed air supply).
7.
When not in use, prior to servicing and on the changing accessories, switch off tool and disconnect from the
compressed air supply.
8. Prior to the replacement and inspection of
belt, the tool is to be isolated from the compressed air supply. Do not perform any servicing work on the tool as
long as it is connected to the compressed air supply.
®
9. MBX
Never touch an
10.
Regularly check pneumatic lines and replace if damaged. Keep vertical handle and tool body dry, clean and free
of oil and grease. Smudges on the body of the tool may lead to accidents.
All manuals and user guides at all-guides.com
Never wear loose clothing or jewellery or other items of clothing that could be
Never carry the connected tool with your hand on the starter lever.
®
MBX
®
Die Blaster belt as long as the tool is in operation.
®
accessories, such as the adaptor system and Die Blaster
Operating instructions
belt, always remove hex socket
GB
®
17