<For gentle epilation>
The gentle cap has a skin protector for gentler epilation. So it
can remove hairs by holding the skin down to reduce pain.
1. Remove the fast cap [B].
2. Attach the gentle cap [C].
●
Apply the epilator at a 90˚ angle to your
skin. Always make sure that the
appliance is in contact with your skin and
press gently while moving it slowly
against the hair growth.
●
Massaging with a body puff may help to prevent ingrown
hairs.
●
Reddening might appear after use. A cool towel will help if you
feel pain or there is a rash.
●
If your skin gets dry after epilation, we recommend applying a
moisture lotion two days after epilation.
Before use
Charging the appliance
For best performance, fully charge the appliance before use.
You cannot operate the appliance while charging.
Charging time = Approx. 1 hour
The epilator can be used for approximately 0 minutes (0
minutes when using the gentle cap) after 1 hour of charging.
(This will differ depending on the temperature.)
6
Plug the charger into
the epilator (a) and a
household outlet (b).
•
The recommended
charge temperature is
1- °C.
2
While
charging
90˚
Red light
appears.
Changing the head
1
1
Remove the head while
holding the head release
button.
2
2
Push the head until it
clicks.
10 minutes
After charging
after charging
is completed
is completed
Blinks once
Blinks once
every 2
every second.
seconds.
1
Abnormal
charging
Blinks twice
every second.
2