Unpacking And Cleaning - Black & Decker FIRE STORM FS210LS Manuel D'instructions

Table des Matières

Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from

all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,

gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household

floor paste wax.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE

CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED

IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE

ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO

ILLUSTRATE TECHNIQUE ONLY.

1). Adjustable wrench

2.) 13mm wrench for stand bolts.

3.) 10mm wrench for splitter assembly bolts, rear supports assembly and extension wings assembly.

4.) Slotted screwdriver.

6.) Phillips screwdriver.

5.) Straight edge and/or framing square for adjustments.

TABLE SAW PARTS

1- Saw

2- Left Extension Wing

3- 1/4 in.-20X1 in.Hex Head

Screw for Left Extension

Wing (3)

4- 1/4 in. Flat Washer for

Left Extension Wing (6)

5- 1/4 in. Lockwasher for

Left Extension Wing (3)

6- 1/4 in.-20 Hex Nut for Left

Extension Wing (3)

7- Right Extension Wing

8- 1/4 in.-20X5/8 in.Hex

Head Screw for Right

Extension Wing (3)

9- 1/4 in. Flat Washer for

Right Extension Wing (3)

10- 1/4 in. Lockwasher for

Right Extension Wing (3)