Publicité
11
model no. 052-0726-0 | contact us 1-800-689-9928
OPERATING INSTRUCTIONS
Instruction for the "SELECT" Key
Press and hold down the "SELECT" key for about 3 secs to turn on
the meter. The meter enters Auto Check mode.
In Auto Check mode, press the "SELECT" key to step through the
functions:
Auto Check mode (default) → continuity test →
non-contact AC voltage detection → AC voltage measurement →
DC voltage measurement → resistance measurement →
frequency measurement → capacitance measurement →
Auto Check mode.
Pressing and holding down the "SELECT" key for about 3 secs will
turn off the meter.
The meter has a process of initialization before it enters
non-contact AC voltage detection mode. During this process,
the meter will not respond if you press the "SELECT" key. Only
after the process finishes (the display shows "
built-in buzzer does not sound) can you press the "SELECT"
key to change meter function.
All manuals and user guides at all-guides.com
NOTE:
" and the
Publicité
