ENGLISH
Long Transmission Distance Standard PoE Switch
◆
Can supply power to network surveillance cameras that without PoE function
◆ 10x 10/1000Mbps auto-sensing RJ45 ports: 8x 10/100Mbps PoE ports, 2x uplink
port
◆ Supports port auto-flip (Auto MDI/ MDIX)
◆ External power supply
◆ Maximum PoE ports power: 130W (Port 1 to Port 8)
◆ Maximum power of single PoE port: 30W
◆
Store-and-forward architecture, 2M forwarding memory
◆
Flow Control Type: Full duplex adopts IEEE 802.3x standard,
half duplex adopts back pressure standard
◆
Network port has lighting-proof function (AC power port:
differential mode +/-2kV, common mode +/-4kV)
◆
Maximum PoE Power: 130W (all PoE ports, port 1 to port 8)
◆
All ports support wire-speed switching, frame size within the
range of 64 to 1536 can achieve wire-speed
◆
Wall-mounted design, easy to install and use
◆ Ports 1 to 8 are compatible with the IEEE 802.3 af/at standard
◆ Fanless design, natural cooling
◆ Compact dimensions
Description
This switch provides a network point for power supply and data transmission. All the
10 Ethernet ports can be connected with 10/100/1000Mps quickly, and the uplink port
is Ethernet interface, among which 1-8 ports can provide standard IEEE 802.3af/at
power supply.
This high-performance switch has a non-blocking switching capacity and switching
speeds of up to 16Gbps. All the RJ45 PoE ports automatically adjust the maximum
connection speed for normal operation, the Auto Uplink™ technology ensures a
sufficient network connection.
Due the advanced self-sensing algorithm supply power for IEEE802af/at terminal unit,
there is no need to worry about damaging proprietary PoE or non-PoE standard
equipment. In addition, it will stop power supply when PoE devices are not connected.
In short, The 1093/831 features simple and reliable design, automatic identification
PoE requirements, duplex and high-speed.
DS1093-592A
5