Best WC43I80 Manuel D'instructions page 8

INSTALL MOUNTING
BRACKET
DUCTED and NON-DUCTED HOODS
1. Construct wood wall framing that
is flush with interior surface of wall
studs. Fig. 6.
Make sure:
a) the framing is centered over
installation location.
b) the height of the framing will allow
the mounting brackets to be
secured to the framing within the
dimensions shown.
2. After wall surface is finished,
secure each mounting bracket
to framing with (2) 4.8 x 38 mm
mounting screws. See chart below
for mounting bracket location.
DUCT
CEILING
20"
HEIGHT METHOD
DUCTED* 34-1/2" 35-1/2" 36-1/2" 37-1/2"
8 FEET
NON-DUCTED
34-1/2" 35-1/2"
DUCTED*
9 FEET
NON-DUCTED
34-1/2"
Note : Minimum hood distance above cook top must not be less than 20" . A maximum
of 30" above cook top is highly recommended for best capture of cooking impurities.
Distances over 30" are at the installer and user's discretion; and if ceiling height
and flue length permit.
* Ducted hood requires the purchase of flue kit model AEWC43SP.
All manuals and user guides at all-guides.com
HOOD DISTANCE ABOVE 36" HIGH COOK TOP (see note below)
21" 22" 23" 24"
MOUNTING BRACKET LOCATION ABOVE 36" HIGH COOK TOP
36-1/2" 37-1/2" 38-1/2" 39-1/2" 40-1/2" 41-1/2" 42-1/2" 43-1/2" 44-1/2"
36-1/2" 37-1/2" 38-1/2" 39-1/2" 40-1/2" 41-1/2" 42-1/2" 43-1/2" 44-1/2"
35-1/2" 36-1/2" 37-1/2" 38-1/2" 39-1/2" 40-1/2" 41-1/2" 42-1/2" 43-1/2" 44-1/2"
- 8 -
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS
SUPPORT BEHIND
DRYWALL
DRYWALL
FIG. 6
25" 26" 27" 28" 29" 30"