Keimling FreshLife Mode D'emploi page 31

Operation
B. Setting up appliance
4. Assembling a additional
sprout barrels (5)
You can order additional sprout barrels as
accessories from your dealer or importer
(see pg 2)
• Completely assemble your FreshLife
except for the sprinkler (2) and the cover
(1)
• Make sure that the opening on the water
pressure tube is closed Attach the three
clips (at a 45° angle towards the inside)
onto the top rim of the first sprout barrel
• Take your new sprout barrel and place
it on the three clips Optimise the fit by
moving it back and forth slightly
• Now attach the additional water tube (4) in
the middle of the new sprout barrel
• Lay one of the additional sprout screens
(3) into the sprout barrel, sprinkle it with
seeds and cover everything with the
second additional sprout screen (smooth
side facing up) Now put the sprinkler (2)
on the top end of the water tube (4) and
put the cover (1) on your double-layer
FreshLife
®
In a triple-layer FreshLife
does not turn as it cannot build up suffi-
cient water pressure (see pg 31, Trouble-
shooting) This does not impair the results
If you should have difficulties remo-
ving the lower sprout screen (3) to har-
vest your seeds, simply remove two
clips and then carefully take out both
screens. To remove the clips, push
away the longer side from bottom to
top.
FreshLife Automatic Sprouter
®
,
®
, the sprinkler (2)
®
31