Eurotops Stereo Digi+ Notice D'utilisation page 4

3.2 DAB mode
3.2.1
DAB scan
【
Press and hold
scanning, do not press any button except for 【
check the progress of scan.
3.2.2
Listening to preset station
Once the scanning has successfully completed and the stations are saved, the radio tunes in the
displayed station and plays. Press 【◀ or ▶】to change the station.
3.2.3
Storing a DAB+ station preset
Tune your radio to the station you wish to store. Long press
"Preset store" displays. Press 【◀ or ▶】to select a preset number you wish to allot
to the station. Press
*After completing the above operation, please switch to other modes(
/Bluetooth mode/Noise sound
3.2.4
Preset recall
1. Press【OK】to recall stations from preset list.
Press 【◀ or ▶】to choose the station.
2.
【OK】
3. Press
Note : To listen to another stored station, always recall the preset list by repeating
steps1, 2 and 3.
3.3 FM mode
3.3.1
FM scan
Press and hold【
*When scanning, do not press any button except for 【
turns off to check the progress of scan.
3.3.2
Fine tune
If the quality of reception is bad, fine tune the frequency by pressing 【◀ or ▶】to
advance or decrease by 0.005MHz with each press.
3.3.3
Storing a FM station preset:
Storing a DAB station preset".
】
till the radio starts scanning available DAB stations. Notes: *
【OK】
to store.
) to make the preset active.
to listen.
】till the radio starts scanning available FM stations. Notes:
】, only if the screen turns off to
The procedure is the same as in section 3.2.3:"
4
【OK】
(central key) till
】, only if the screen
When
FM radio