to be paired with Your mobile phone (or the first of the desired phones or audio gateway(s)).
Pairing on mobile (or other) phone side
On the mobile phone's side you start the pairing procedure as described in the user manual of your phone.
Within the setup menu your phone will search for active Bluetooth
Your headset will be detected as „BT 1000 by Albrecht". Mobile phone and Bluetooth
data, which contain among others also the individual serial numbers of all devices. So it is ensured that a
communication can only start between registered partners. After registration of your Bluetooth
will be asked for a PIN code. Please use following PIN code:
(if your headset user manual or gift box should contain a card with another PIN code, please use this PIN
code instead of 1234)
You can repeat the pairing procedure with the other remaining 2 key combinations for up to 2 more telephones
(like office phone via BT 2000 audio gateway, company mobile phone or private phone)
Selecting the phones for operation with the headset
As long as you use the just paired phone/headset combination, the headset will stay connected with this
device. Selecting another of the totally 3 possible phones will required that You select between the phones:
•
Press the 2 buttons (you had selected for the desired phone) together
•
Release the buttons (You will hear the corresponding melody)
•
Switch the headset 1 x off and on again
Please remember: You will only need this selecting procedures if You have used the headset with another
device before!
Note: All major mobile phone manufacturers update the Bluetooth
together with their software releases. The mobile phone distributors may assist you. Please make sure that
you use their latest instructions only. You may download the instructions from the internet or ask your phone
distributor.
All manuals and user guides at all-guides.com
1234
17
TM
devices in your communication range.
TM
headset will exchange
TM
pairing procedures from time to time
TM
headset You