Important Advice For Transmission Range; Programming For Use With Other Audio Devices; Pairing With Up To 2 More Devices - Albrecht BT 2000 Manuel D'instructions

• Adjust the earphone volume by pressing the volume buttons
your wishes. You may also feel the volume keys with your fingers: The key with one dot reduces the
volume, while the key with 3 dots will increase it. This adjustment will have no effect on the volume
of the microphone! This volume is automatically adjusted by the volume of our own voice and the
integrated DSP (digital signal processor).
• After finishing your call do not forget to put back your handheld receiver, otherwise the line might still
be occupied thus creating unnecessary costs!

Important advice for transmission range:

The Bluetooth™ headset has an averange range of about 10m. This range can be influenced by your
surroundings. Electronic appliances close to your telephone may reduce range whereas a free area may even
increase it.
In case your Bluetooth™ headset has lost connection to your telephone just press the center button
your headset to reconnect. In case this does not work, just switch your headset off for a short moment and on
again before pressing the center button

Programming for use with other audio devices:

According to the international Bluetooth
reliable and safe audio transmission to a lot of different devices using the Bluetooth
comes factory programmed („paired") and ready for use with the individual audio-gateway supplied together
as a set. If you want to connect the headset with other Bluetooth
complete a new pairing procedure with the new partner device. Your BT 2000 heaset is able to be paired with
up to 3 totally different audio devices, (e.g. audio gateway + 2 different mobile phones).
In such a pairing procedure, headset and partner device must exchange informations and security data,
before they can mutually acknowledge themselves as partner units. The whole procedure, which includes a
reset, is defined as „pairing". Important: Only paired devices can communicate with each other, there is no
comminication possible with a third device at the same time.

Pairing with up to 2 more devices:

• The first step is to switch the headset off and on again.
•
Then select 2 of the 3 keys of the headset and press them together for about 1 second. Keep in mind,
which of the keys you use, because you have up to 3 possible combinations (for up to 3 telephones:
and , or
headset comes already paired with the BT 2000, and the combination
used for pairing with Your BT 2000 in the factory!
•
Release the buttons. You will hear a short melody as confirmation.
•
Repeat this procedure another 2 times with the same keys. So you hear the melody totally 3 x.
•
Now switch the headset 1x off and on again (by slide switch) Now your Bluetooth
All manuals and user guides at all-guides.com
at your headset.
TM
standards and agreements your headset ist able to establish a
and , (or and ) , one combination for each telephone. Please note that the
or
TM
devices (e.g. mobile phone), you must
16
of the headset according to
TM
technology. Yor headset
and has already been
TM
headset is ready
at