Beha-Amprobe AT-6000-EUR Manuel De L'utilisateur page 30

5. MAINTENANCE
Changing battery for transmitter:
The battery compartment on the back of the AT-6000-TE is designed to make it easy for
the user to change the battery. A screw is added to secure the battery in case the unit is
dropped. The eight (8) AA 1.5V alkaline or 1.2V rechargeable NiMH batteries may be used.
NiMH batteries need to be removed to be charged.
1. Make sure that the Transmitter is turned off and disconnected from the circuit.
2. Use the screw driver to unscrew the battery compartment screws.
3 Remove the battery cover.
4. Install Batteries.
5. Replace the battery cover and secure it with the provided screws.
Figure 5.0a: Changing transmitter battery
26