Power Fist 8784738 Manuel De L'utilisateur page 4

8784738
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4. Securely hold this tool using both hands. Using a tool with only one hand
can result in loss of control.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific function.
Do not modify or alter this tool or use it for an unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced. Repair or
replace the parts.
3. Do not use this tire bead seater where there is a risk of causing a fire or
explosion, such as where flammable liquids, gases, or dust are present.
This tool can create sparks that may ignite flammable materials.
4. Only use an air compressor that is rated to fill the tank.
5. Never exceed the maximum rated pressure.
6. Do not fill the tank with anything other than air at ambient temperature
from a clean, oil-free, dry air supply.
7. Always charge the tire bead seater before use, and then discharge it after use.
8. Do not loosen or tighten fittings when the tank is charged.
9. Periodically drain the tank, but never remove the drain plug when the tank
is charged.
10. Never transport or store a charged bead seater.
11. Do not allow this tool to contact an electrical source. The tool is not
insulated and contact could cause an electrical shock.
12. Disconnect the air supply from the tire bead seater and discharge tank before
making any adjustments.
13. Do not use the tire bead seater to dust equipment or people.
4
5 Gallon Tire Bead Seater/Blaster
For technical questions call 1-800-665-8685
V4.0