Yeelight Lightstrip Pro Manuel D'utilisation page 7

EN
Works with Mijia
"Works with Mijia"means that the product can be control by Mi Home app or xiaoai.
Please note that "Works with Mijia" only performs software-level verification. Xiaomi
and Mijia are not responsible for the manufacturing, standard implementation and
quality supervision of the products and enterprises.
Apple HomeKit Smart Control
1. Open the Home APP in your iPhone or iPad.
2. Click "+" button, and add accessory as per the prompts in the app. Scan the QR code on the right or under
the product base. Alternatively, input the 8-digit code shown above the QR code to complete the access.
* Make sure the Wi-Fi network is available and you can get access to the internet properly. This product is
not compatible with 5G network.
* To ensure proper Homekit compatibility, it is recommended to use iOS 9 or above.
* HomeKit codes are indicated under the base of contorllor. Please be noted that HomeKit codes are required
for reset every time.
Apple is the trade mark of Apple LLC.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the
technology identified in the badge and has been certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Apple, HomeKit,iPad,and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended.
Home hub
A customer who owns an Apple TV (4th generation or later) with tvOS 10 or later, an iPad with iOS 10 or later,
or a HomePod can control HomeKit-enabled accessories away from home and automatically through
triggers such as time of day, location, sensor detection, or the action of an accessory.
How to Reset
Disconnect the power. Press the power button and reconnect to the power supply without release. Hold the
button for five seconds until the lightstrip flows in red, green, and blue, and turns to yellow. Then, release the
button. Reset is completed.
* Please reset the lightstrip before using it in a new network environment.
4