Setup Instructions - Yeelight Lightstrip Pro Manuel D'utilisation

EN

Setup Instructions

Plug into the adapter, rotate by 45
degrees clockwise and snap into
place.
If the light strip needs to be extended,
please purchase Yeelight Lightstrip
Pro Extension. Open the tail end
buckle of the light strip, remove the
tail plug, connect the end with 4 pins
of the extension strip with the tail
end of the original strip, and tighten
the buckle.
To ensure that the functions can work normally:
① After connecting the extension strip, ensure the tail plug is correctly plugged into the
tail end of the light strip;
② After cutting the light strip, set the length of the light strip in the app (Mijia app
QR code).
2
Insert the end with 4 pins into
the corresponding socket, and
fasten the buckle.
Install the tail plug at the tail
end of the extension part and
fasten the buckle to complete
the connection.
Clean the installation surface,
paste and fix the lightstrip.
Connect and plug in the power
supply.