Install The Stand - Samsung 4 Serie Mode D'emploi

See separate guide for installing the stand.
Stand (1EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown.
(Correct assembly)
2. With your TV upright, connect the TV to the Stand.
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two people lift and move the PDP TV.
[
Do not insert your fingers into the stand base slot of the TV when installing the stand base.

Install the Stand

Guide Stand (1EA)
x4
(M4 X L12)
Front
Rear
DO NOT USE
CHEMICALS
3. Fasten four screws (M4 X L8) at position.
x4 (M4 X L12)
x4 (M4 X L8)
Screws (8EA)
Top View
ATTENTION
DO NOT USE DO NOT USE
GREASE OIL
(Incorret assembly)
x4
(M4 X L8)
5
English