Mounting With Screws - Chamberlain RFDIC Mode D'emploi

Assemble
Intercom
Step 1: Install 4 AA Alkaline batteries (not provided).
(Lithium batteries recommended for colder
environments.)
Step 2: Adhere rubber pads to bottom.
Repeat Steps 1 and 2 for any additional intercoms.
Doorbell
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
Program Intercom to Doorbell
Step 1: Press the Learn
button on the intercom until a
beep is heard.
Step 2: Within 10 seconds
press the Learn button on the
doorbell until a beep is heard.
Mount Doorbell
The doorbell can be mounted by using the included
screws or by using the double-sided mounting tape. It
is recommended to use the mounting tape on
surfaces such as metal or glass.

Mounting with Screws

Step 1
Mount doorbell with small silver screws. Screw the
top two screws halfway into the mounting surface.
Place back of doorbell over screws. Tighten screws.
Step 2
Put the remaining silver screws into the bottom holes
of doorbell. Tighten screws.
2