Lorex ACSOL2 Serie Guide De Démarrage Rapide page 7

Option A - Installing the solar panel separately
1. The solar panel is designed
to maintain the camera
battery pack's charge. Make
sure to first charge the
battery pack using the micro
USB cable.
2. Stick the wall mount
template in the desired
mounting position.
3. Drill into the wall mount
template's marked holes
using the 1/4" (6mm) drill bit.
If attaching to masonry,
gently tap four anchors into
the holes.
4. Secure the wall mount using
four screws (see Figure 1).
Figure 1
5